Surfsight - How to bulk edit event settings

Surfsight - How to bulk edit event settings

  1. Go to Events tab and click on the check-box right beside Devices then click ‘EDIT SELECTED’

 

  1. The event settings will pop up, now all devices that are currently in the ‘Devices’ group will be changed on this window.

    • Related Articles

    • Surfsight - How to Reboot Camera

      Here are the steps for rebooting this camera when you get a chance. After you complete the reboot, let me know, and I can see if that resolves the issue or if we need to get you that new SD card. Using the screwdriver that came with the camera, ...

    • Downloading Surfsight Recordings

      (Updated 11/22/23) The following can be downloaded from the Recordings area: recordings from road-facing lenses and in-cab lenses recordings from auxiliary devices recordings by date and time Refer to screenshot if needed.. Click Recordings from the ...

    • Autonomise Device Channel Settings

      Device Channel Labels: In order to update the labels for video channels, locate the device type and click ‘edit device’ Select updated label from the drop down menu and click ‘Save’ Organization Emails: Incident Emails, Panic Button Alert Emails, ...

    • Autonomise System

      System To administer key elements of the platform System > Audit History: to see a full audit history of changes to information on the platform. Filter on Entity (e.g. Addresses, Drivers, Event Notes, Fleets, Map Settings, Organisation Licenses, ...

    • Install and Hardware Support

      Here are the steps for rebooting this camera when you get a chance. After you complete the reboot, let me know, and I can see if that resolves the issue or if we need to get you Install the AI-12 Installation safety warnings Getting started with the ...