Format the SD card

Format the SD card

When you insert a new SD card into your AI-12 dashcam, you need to format it. You can also reformat the dashcam SD card and auxiliary camera SD cards.

When an SD card is formatted successfully, the SD card formatted event is triggered and the card is assigned a UUID, or a unique identifier. This UUID is replaced each time the card is reformatted.

Always format an SD card when any of the following apply:

  • The SD card has not been supplied by MiFleet

  • You are replacing a card supplied by MiFleet

  • You are troubleshooting device alarms.

You can format and reformat the SD cards in the dashcam as follows:

To reformat an SD card:

  1. When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen.

  2. Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently.

  3. dashcam_enterPinScreen2

  4. dashcam_viewSceen

  5. Press Settings.

  6. Scroll down and select Format SD card.


    • Related Articles

    • Replace the dashcam SD card

      SD cards could become corrupted, damaging data or preventing overwriting with additional data. This situation would require replacing the SD card. Power off the dashcam To power off the dashcam: When you are in the parked vehicle with the parking ...

    • C6DAI SD Card Installation

      SD Card Installation Object Location Object Description I SIM Card and SD Card Panel J SIM Card and SD Card Panel Screw K Device USB Port L Device SIM Slot M Device SD Slot

    • View video from SD Card - Streamax

      Access the Ceiba Software Insert the SD card into your PC Open CEIBA2, and select Type as “Local” The username is admin Password is blank Hit OK After logging in, double-click the serial number on the left, and you’ll see the calendar appear below. ...

    • Quick Guide CEIBA Video Software - Playback and Export video segments from the SD card

      Ceiba Video Software Overview Ceiba is viewing software specifically designated for a variety of VisionTrack hardware. This tool is used when extracting large segments of media from the hard drive of the DVR or SD card for a dashcam. 1. Access the ...

    • Install and Hardware Support

      Here are the steps for rebooting this camera when you get a chance. After you complete the reboot, let me know, and I can see if that resolves the issue or if we need to get you Install the AI-12 Installation safety warnings Getting started with the ...